August 2018 – Service life with “Plusline” milling cutters and “PFB” ball end mills from OSG increased: Professional Journal “maschine+werkzeug”, 06/2018: At the beginning of this year, Formenbau Züttlingen broke new ground with the “Plusline”series milling cutters and the “PFB” ball milling cutters from OSG. The manufacturer was particularly surprised by the precision and service […]

December 2017 – over 200 indoor floodlights exchanged: LED spotlights from ESM Vertriebs GmbH instead of HQL spots now illuminate our production halls brighter, saving more than 60% of electricity and reducing CO2 emissions in the same proportion.

November 2017 – Success needs space: For smaller moulds and as a workplace for our trainees, we have added a production hall of almost 400 m².

April 2017– Machine park extension: New processing center „POSmill E 2050“: Travel distances, 3 axes: X: 2050 mm; Y: 1150 mm; Z: 700 mm. Table load: 3000 kg.    

February 2017 – we have expanded our machine park: Krauss Maffei 1-component injection moulding machine KM 650 3500 C 2 with 650 metric tons clamping force for shot weight from approx. 0.5 up to 1.44 kg. We offer our injection molding machines as a service for tryouts or for small series production.

November 2016 – in step with actual practice: Employees of the Daimler, Brose and SMP companies are examining a stack injection mould with 4 cavities as well as our company.

September 2016 – Machine Upgrades: Due to the additional installation of a 2-Component Bolt Unit KM / 380 BO V, we can inject two components with our KraussMaffei “KM 3200 MX” injection moulding machine: 1. Component: approx. 1 to 8 kg, 2. Component up to 140 g injection weight. We offer this as a service for […]

August 2016 – Machinery extension: Our latest Equipment acquisition is a precision screw cutting and bar lathe KAM: K +: L + Z DKM 500 S, with high operating comfort and 82 mm spindle clearance. The machine is designed for high cutting performance and good cutting results. Peak height: 250 mm; Peak widths: 1000 – […]

November 2014 – HZ FbZ exhibition stand at the “Euromold” in Frankfurt.  http://www.euromold-pavilion.com/index.php?id=1083&l=2 2014 – HZ FbZ-Messestand bei der „Euromold“ in Frankfurt. http://www.indiamold.de/index.php?id=1083

August 2013 – Machine park extension: POS processing center “POSMILL C1050”: Travel distances, 3 axes: X: 1050 mm; Y: 530 mm; Z: 630 mm. Table load: 700 kg.